To Add A Baseband Test Tone To The Amps Transmitter - Nokia NPD-1 Series Troubleshooting - Rf

CCS Technical Documentation
between normal and local modes, use the "Phone Control" dialog box as shown below.
This setting will be lost if the phone is powered down.

To add a baseband test tone to the AMPS transmitter

To add a baseband test tone to the AMPS transmitter, open the "Test Tone" dialog box as
shown below and set the parameters as desired.
Issue 1 11/2002
Nokia Corporation
Troubleshooting — RF
Confidential
NPD-1
Page 51