Network Wan; Network Setting; Routing Setup - Buffalo AirStation WBR-G54 Owner's Manual

The Connect button will not appear until
PPPoE is set.
Disconnection Time - Specify the number
of minutes (0-1440) before automatic
dis con nect is performed. If "0" is en-
tered, dis con nect function is disabled. If
Con tin u ous Connection is selected, the
timer is disabled.
Authorization - Authorization method
for accessing the ISP PPPoE server. If
unknown, select Auto authorization.
MTU (Maximum Transmit Unit) Size -
Maximum Transmit Unit (578-1492) when
using PPPoE.
MRU (Maximum Receive Unit) Size - Maxi-
mum Receive Unit (578-1492) when using
PPPoE.
Keep Alive - Enables the PPPoE client to
send a Link Control Protocol (LCP) echo
request to the PPPoE server once per
minute. If there is no reply within six
minutes, the client disconnects. Set to
Disable if frequent disconnection occurs.

4.2.2 Network WAN

WAN side (Internet) parameters.
Host Name - Enter the host name as
desired.
Default Gateway - A default gateway IP
should be assigned to the AirStation. If
unknown, leave blank. If Auto IP as-
sign ment from DHCP Server was selected
in section 4.1.3, a gateway IP is assigned
automatically, provided the DHCP server
is set to provide one.
DNS Server Address - Enter the primary
and secondary DNS address(es) of the
server to be used by the WBR-G54 for
DNS resolution. If DNS was set to Do not
use (Section 4.1.3), leave blank. If Auto
IP as sign ment from DHCP Server was
selected, DNS addresses are assigned
automatically, provided the DHCP server
is set to provide them.
Port Number for WEB Setting - Set
a specifi c port number when remote
setup of the AirStation is planned.
PING from WAN - Allows a PING
test from WAN side. Select Do not
respond or Respond.

4.3 Network Setting

4.3. 1 Routing Setup

RIP transmission to WAN - Allows
RIP transmission or None (no RIP)
to WAN
RIP reception from WAN - Allows RIP
reception or None (no RIP) from WAN
Figure 4.3.1A
Routing
Setup
Figure 4.3.1B
Routing
Setup
13