television-operAtion
Basicfunctions
switchingonandoff
»
1 Press
power
to switch on the television from standby
mode.
»
2 Press
power
standby.
selectingchannels
»
«
1 Press
1...0
to select presets directly.
2 Select channels step by step with
»D«
.
3
Open the channel list with
preferred television channel with
B
A
»
«
»
«
or
and press
Exit the channel list with
selectingapresetAvchannel
»
1 Open the
Select Source
2 Select an AV preset with
A
»
«
»
and press
»
«
3 Use
1...0
to switch back to the television
channel.
Adjustingthevolume
1 Adjust the volume with
switchingsoundon/off
»
«
1 Press
Mute
to mute the sound or switch
it on again.
Displayinginformation
1
Display information with
– T he display disappears automatically after
a short while.
1 6
ENGLISH
«
»
«
»C«
1...0
,
or
or
«
to switch the television to
»C«
»
«
oK
, select the
»C«
»
«
oK
to confirm.
»M«
.
«
menu with
»C«
»D«
»
,
,
«
oK
to confirm.
B
A
»
«
»
«
or
.
»
«
İ
.
--------------------------------------------------------------------------------
Freeze-frame
If you wish to view a particular scene for longer,
you can "freeze" the frame of the current pro-
»D«
gramme.
1 Activate the freeze-frame function with
(yellow).
2 End the freeze-frame function with
low).
note:
Freeze-frame function is just supported
7
720p and less than 720p definition.
or
Zoomfunction
This function allows you to enlarge the picture
»D«
,
,
as required.
1 press
display in three steps.
note:
»
«
.
I
Zoom function is just supported 720p and
7
B
«
or
less than 720p definition.
Zappfunction
This function remembers the channel you are
c urrently watching while you switch over to other
ones (zapping).
»
1 Press
channel to be stored in the zapping memory
and press
»
2 Press
a nother television channel.
»
3 Press
evision channel and the last television chan-
nel viewed.
4
End the function with
N
»
«
repeatedly to enlarge the
«
»C«
»D«
1...0
or
,
»
«
to confirm.
«
»C«
»D«
1...0
or
,
«
to switch between the saved tel-
»M«
.
»
«
●
»
«
(yel-
●
to select the
to switch to