Connecting A Pc; Selecting Presets For The Pc; Settings For Pc Mode - Grundig 37 XLC 3220 BA Manual

operAtion­As­A­pC­Monitor
Connecting­a­pC
»
1 Connect the pC-in
sion to the corresponding socket on the PC
using a VGA cable (video signal).
»
2 Connect the
Audio
sion to the corresponding socket on the PC
using a suitable cable (audio signal).
note:
Adjust your PC to the monitor (for example,
7
picture resolution 1280 x 768, picture fre-
quency 60 Hz).
selecting­presets­for­the­pC
» «
1 Press
I and use
A
» «
to select the preset
» «
oK
to confirm.
settings­for­pC­mode
1 Open the menu with
»
2 Select the
SOURCE SETUP
»C« »D«
with or
firm.
»
– T he SOURCE SETUP
3­ Select the function or setting with
»D«
, and then use
to implement it.
«
socket on the televi-
«
socket on the televi-
B
»C« »D« » «
, ,
» «
PC and press
»M«
.
«
menu item
» «
oK
and press to con-
«
menu appears.
»C«
B
»C« »D« » « »
, or ,
Source
Auto Ajust
Extended settings
Auto Ajust Mode
Position
Size
Phase
or
Options:
»
– Auto Ajust
tion.
»
– Auto Ajust Mode
» «
On if the configuration should be imple-
mented automatically in PC mode.
»
– Position
vertical picture position.
» «
– Size to set the cycle frequency.
or
» «
– Phase
A
«
pictures or horizontal interference.
»M«
4 Press
­ - ---------------------------------------------------------
SOURCE SETUP
50H - 50V
Exit
Back
«
for automatic PC configura-
«
, select the option
«
to configure the horizontal and
to eliminate flicker, unfocused
to end the setting.
ENGLISH
20.09.2010
15:46
PC
On
0
30
­ 2 9