Advertisement
CONSUMER RESPONSIBILITIES
When cleaning up after installation, do not use abrasive
cleansers, as they may scratch and dull the toilet surface.
Use warm water and a liquid detergent to clean the surface.
Remove stubborn stains, paint, or tar with turpentine or paint
thinner. Do not allow cleaners containing petroleum distillates
to to remain in contact with any toilet surface for long periods
of time.
Remove plaster by carefully scraping with a wood edge. Do
not use metal scrapers, wire brushes, or other metal tools.
Use a powder type detergent on a damp cloth to provide mild
abrasive action to any residual plaster.
Clean the outside surface of your vitreous china product with
mild soap and warm water. Wipe the entire surface
completely dry with a clean, soft cloth.
Most toilet bowl cleaners are not harmful to the vitreous china
surface of the toilet bowl. Please follow the bowl cleaner
manufacturer is instructions carefully.
Do not use abrasive cleaners or solvents.
WARNING: Risk of property or product damage.
Do not use in-tank cleaners. Products containing
chlorine (calcium hypochlorite) can seriously damage
fittings in the tank. This damage can cause leakage
and property damage.
Kohler Company shall not be responsible or liable for any
damage to these tank fittings caused by the use of cleaners
containing chlorine (calcium hypochlorite).
CAUTION: Don t use any cement while installing
'
the toilet.
Heat expansion of the toilet may damage
the feet of the toilet. Kohler will not be responsible for
any damage because of using cement.
WARNING: Risk of product damage.
Do not throw into the toilet what is easy to block it,
such as newspaper, paper pilch, sanitary towel.
Do not bump the vitreous china with great force to
prevent it from damaging and leaking.
Do not use the product in the water below 0 C.
CAUTION:
Please do not use hard materials (like
scouring pad) to clean product surface, especially the
product logo.
1268139-T01-A
o
-5-
(
)
o
0 C
Advertisement
