Audio Menu - Dell 5100MP User Manual

– Component cable (720p, 576i/p, 480i/p)
– S-Video cable
– Composite cable
• 16:9 — The input source scales to fit the width of the screen.
• 4:3 — The input source scales to fit the screen.
Use 16:9 or 4:3 if you are using one of the following:
– Computer resolution greater than SXGA+
– Component cable (1080i/p)
V M —Select a mode to optimize the display image based on how the
IDEO ODE
projector is being used: Movie, Game, PC, sRGB (provides more accurate color
representation), and User (set your preferred settings). If you adjust the settings
for White Intensity or Degamma, the projector automatically switches to User.
W I —Setting 0 to maximize the color reproduction and 10 to
HITE NTENSITY
maximize the brightness.
D —Adjust between 1 and 4 to change the color performance of the display.
EGAMMA
The default setting is 3.

Audio Menu

28 Using Your Projector
V —Press
OLUME
and to increase the volume.
T —Control the higher frequencies of your
REBLE
Press
audio source.
treble and press
B —Control the lower frequencies of your
ASS
audio source. Press
and press to increase the bass.
M —Allow to mute the volume.
UTE
A S —Select HDMI to have the
UDIO OURCE
HDMI output source, and select Audio to have
the audio output source.
to decrease the volume
to decrease the
to increase the treble
to decrease the bass