Installation - Husky H4470 Use And Care Manual

Installation

1
Cleaning the air hose
□ A 3/8 in . air hose is required, with a maximum length of
25 ft .
□ Clean the air hose of accumulated dust and moisture
before connecting it to the air supply .
nOTE: If a longer air hose is required, connect a 1/2 in . air
hose to the 3/8 in . air hose to ensure the air saw has the
necessary air supply .
2
Connecting to the air supply
□ Always use clean dry air . Excessive moisture and dirt will
greatly reduce the life of any air motor . We recommend the
installation of an in-line filter-regulator-lubricator as close
to the tool as possible .
□ Ensure all hoses and fittings are the correct size and
secured tightly .
recommended Air line Set-up
ref . description
1 Impact Wrench
2 Quick Plug
3 Quick Coupler
4 Air Hose
5 In-line Regulator
6 In-line Lubricator
7 In-line Filter
8 Air Compressor
5
Please contact 1-888-43-HUSKY for further assistance .
HUSKYTooLS .Com