TP-Link RE205 User Manual page 16

Chapter 2
2. Wait until the Signal LED changes to solid on, which indicates that the WPS connection
is successful.
Note:
If the LED does not turn solid on, try again or refer to
Browser.
3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above
to connect to the other band.
4. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED turns solid blue. If it doesn't, relocate
the extender closer to the router to achieve better signal quality.
Note:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
5. Enjoy! Connect your devices to the extender wirelessly or via an Ethernet cable, then
enjoy the internet.
The extended network information is as follows:
Method 1: Via the TP-Link Tether App
Router
Halfway
Smartphone
Set Up Internet Connection
Suitable location
Too far from router
No connection
Devices
Tablet
Smart TV Game Console
or Method 2: Via a Web
Laptop
Desktop
13