TP-Link RE300 User Manual page 16

Chapter 2
3. (Optional) If the extender connects to a dual band router, repeat steps 1 and 2 above
to connect to the other band.
4. Relocate your extender for optimal Wi-Fi coverage and performance.
1 ) Plug in the extender about halfway between your router and the Wi-Fi dead zone.
The location you choose must be within the range of your router.
2 ) Wait for about 2 minutes until the Signal LED
relocate the extender closer to the router to achieve better signal quality.
Note:
To minimize signal interference, please choose a location which is far away from Bluetooth devices and other
household electronic devices, such as cordless phones, microwave ovens and baby monitors.
5. Enjoy! Connect your devices to the extender wirelessly, then enjoy the internet.
The extended network information is as follows:
Tip:
• If you want to customize the extended network name, refer to
• If you cannot find the network names with _EXT in your Wi-Fi network list, this means that the extender has been
connected to a OneMesh router and automatically copied its wireless settings. For more information, refer to
OneMesh with Seamless
Router
Extended Network Names:
Router's network name with _EXT at the end
or
Same as your OneMesh router
Passwords:
Same as your router
Solid On
Roaming.
Set Up Internet Connection
turns solid white. If it doesn't,
Suitable location
Too far from router
No connection
Devices
Halfway
Configure Wireless Network.
13