Dell Latitude C610 System Information Manual page 24

Select the following boot sequence and exit the system setup program:
5
•
•
•
Insert the Drivers and Utilities CD into the CD drive.
6
Turn the computer off.
7
Turn the computer on. The computer starts and automatically begins to run the Dell
8
Diagnostics.
When you have completed running diagnostics, remove the Drivers and Utilities CD
9
from the CD drive.
To change the boot sequence, repeat steps 1 through 6, customizing the boot sequence to
fit your needs. Then restart your computer.
When you start the diagnostics, the Dell logo screen appears, followed by a message telling
you that the diagnostics is loading. After the diagnostics loads, the Diagnostics Menu
appears.
To select an option from this menu, highlight the option and press
key that corresponds to the highlighted letter in the option you choose.
22
D e l l ™ L a t i t u d e ™ C 6 1 0 / C 5 1 0 S y s t e m I n f o r ma t i o n G u i d e
Boot First Device: Diskette Drive
Boot Second Device: CD/DVD/CD-RW Drive
Boot Third Device: Internal HDD
, or press the