GE APCA14 Owner's Manual And Installation Instructions page 12

Installation Instructions
Connect Exhaust Hose to the
4.
Window Panel
Place the Air Conditioner close to the window
ensuring there is at least 20" of clearance from the
wall and any other obstructions. Extend the hose so
that it reaches the Window Kit. Insert the Exhaust
Hose Adapter into the opening in the Window Kit
and slide it into the locking position. Ensure that
the hose runs straight to the window with no excess
extension. Important: The Air Conditioner must be
vented to the outside. Do not use a longer hose or
extend the hose included with the Air Conditioner or
the unit will not cool properly and will overheat.
Vertical
Window
12
5.
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Horizontal
Failure to do so can result in death, fire or
Window
electrical shock.
A. Plug the power cord into a grounded 3
B. Press the Reset button on the plug to
C. Allow 20" of clearance around the Air
D. When removing the Air Conditioner, be sure
COMPLETE INSTALLATION
WARNING
Electrical Shock Hazard
prong outlet.
ensure the safety plug is providing power to
the Air Conditioner.
Conditioner for proper air circulation
to remove the Window Kit.
49-5000439 Rev. 1