System Setup; Overview - Dell Dimension 3000 Owner's Manual

Environmental
Temperature:
Operating
Storage
Relative humidity
Maximum vibration:
Operating
Storage
Maximum shock:
Operating
Storage
Altitude:
Operating
Storage

System Setup

Overview

Use system setup as follows:
• To change the system configuration information after you add, change, or remove any hardware in your
computer
• To set or change a user-selectable option such as the user password
• To read the current amount of memory or set the type of hard drive installed
Before you use system setup, it is recommended that you write down the system setup screen information
for future reference.
NOTICE:
Unless you are an expert computer user, do not change the settings for this program. Certain changes
can make your computer work incorrectly.
80
Appendix
10° to 30°C (50° to 86°F)
NOTE:
At 30°C (86°F), the maximum operating altitude is 914 m
(3000 ft).
–40° to 65°C (–40° to 149°F)
20% to 80% (noncondensing)
0.25 G at 3 to 200 Hz at 0.5 octave/min
2.20 Grms at 10 to 500 Hz at 1 octave/min
105 G, 2 ms
32 G with a velocity change of 596.9 cm/sec (235 inches/sec)
–15.2 to 3048 m (–50 to 10,000 ft)
NOTE:
At 30°C (95°F), the maximum operating altitude is 914 m
(3000 ft).
–15.2 to 10,670 m (–50 to 35,000 ft)