Kenwood DPX-5200BT Quick Start Manual page 13

Removing the unit
Wiring connection
Fuse (10 A)
STEERING WHEEL
REMOTE INPUT
REMOTE CONT
ANT CONT
P. CONT
MUTE
ISO connectors
Antenna terminal
If no connections are made, do not let
the wire come out from the tab.
Part list (supplied)
(A) Mounting sleeve (×1)
(B) Trim plate (×1)
(C) Wiring harness (×1)
(D) Extraction key (×2)
a Light blue/yellow: To the steering wheel remote control adapter
b Blue/white: To the power control terminal when using the optional power
amplifier or to the antenna control terminal in the vehicle
c Brown: To connect the Kenwood navigation system, refer your navigation manual
d Yellow: Battery wire
e Red: Ignition wire
f Red: A7 from ISO connector
g Yellow: A4 from ISO connector
Pin Color and function (for ISO connectors)
A4 Yellow
A5 Blue/White
A7 Red
A8 Black
Purple ], Purple/black [
B1, B2
B3, B4 Gray ], Gray/black [
White ], White/black [
B5, B6
B7, B8 Green ], Green/black [
: Battery
: Power control
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)
3