INSTALLATION Preparation The preparation kit is necessary to mount the radio on the dashboard, this kit is available at electronics stores and car audio specialists, check the installation kit before using it to make sure it is the right one for your vehicle. INSTALL THE DEVICE 1.
WIRING CONNECTIONS WIRING DIAGRAM AMPLIFIER OUTPUT White: Front Output Left Red: Right Front Output Red: Rear Right Output White: Rear Output Left PRECAUTION +12V DC NEGATIVE EARTH CONTROL PANEL BUTTONS www.PyleUSA.com...
CONTROL PANEL BUTTONS (Power)/MODE (source) button 2. SEL (select/menu) button and VOL (volume) knob 3. Back to the previous con guration point Pess /Bass enhances the pulse function In power on mode, press the MUTE button to toggle mute ON or OFF. /DISP (CLK) button (pause/start), Button 1 preset station 6.
Page 5
ROCK/POP/FLAT ( at), LOUD ON/OFF (volume), DX/LOC, STEREQ/MONO, CLOCK 12/24, BLUE/RED/CYAN/GREEN/PURPLE/YELLOW/WHITE/AUTO. Turn the VOL knob on the front panel or press the VOL+ /VOL- button on the remote control to set the selected item. Press SEL button to select SWE (subwoofer) Rotate the knob to select ON/OFF Press SEL button then press band button get into 10EQ control mode.
Page 6
GENERAL OPERATION Preset Equalizer (EQ) Press the EQ button on the front panel or on the remote control to switch between EQ, OFF, CLASS, ROCK, POP, FLAT. USB port The USB port on this stereo device is designed for playing media from USB memory devices.
Press and hold the desired preset button (numbered 1-6 on the face of the radio) • for more than 2 seconds to save the station to that preset number. To recall a preset station Select the desired band. • Brie y press a preset button (numbered 1-6) to recall the corresponding preset •...
Page 8
EJECT/USB/SD To eject a USB device, press the button to stop playback, then remove the • USB device. To eject an SD card, press the button to stop playback, and press the button • to release and remove the front panel, then remove the SD card from the chassis. Play/Pause Press the (play/pause) button to pause or resume playback...
2. When the phone nds this ship/car audio system, the “PYLE” name will be displayed. 3. Choose the “PYLE” from the device list to pair and connect with this ship/car audio system. Upon con rming, the BT logo will stop ashing.
Answer a Call When the mobile phone is called, the incoming telephone number displays on • the LCD. To receive the call, press the button on the control panel. • Reject a Call or End a Call To reject or end the call, press the button on the control panel.
TROUBLESHOOTING If you suspect something is wrong, immediately switch power o . Do not use the unit in abnormal condition, for example without sound, or with smoke or foul smell, can cause re or electric shock. Immediately stop using it and call the store where you purchased it.
Samsumg "S" Voice and other associated Apps are not compatible. PYLE APP PYLE Smart App is the ultimate in remote technology for your PLMRB38B, PLMRB39W, PLMRK47BK, and PLMRKT49WT. Download the PYLE Smart app from Google or Apple Store and install it on your phone or tablet.
Page 14
PLMRB38B PLMRB39W PLMRK47BK PLMRKT49WT Marine Stereo Receiver Power Ampli er AM/FM/MP3/USB/AUX/SD Card Reader Marine Stereo Receiver, Single DIN, 30 Preset Memory Stations, LCD Display with Remote Control Features: AM/FM/MP3/USB/AUX/SD Card Reader Marine Stereo Receiver • Single DIN • LCD Display with Remote Control •...
Page 15
Wireless BT Connectivity: Built-in Wireless BT Music Streaming • Built-in Microphone for Hands-Free Calling • Conveniently Reject/Answer Incoming Calls • Compatible with All of Your Favorite Bluetooth Devices • (iPhone, Androids, Smartphones, iPad, Tablets, etc.) Wireless BT Version: BT VERSION 4.2 •...