Thrustmaster T150 Manual page 3

ENGLISH-
BOOTLOADER METHOD: how to wake your racing wheel if it is no longer
recognized on PS3™, PS4™, PS5™ or PC
(i.e. in the event of firmware loss)
Required system: PC running Windows® 7, 8 or 10.
On PC, the USB sliding switch on the T150 racing wheel's base
If you haven't already done so, install the
1)
your PC. You can download it here:
https://support.thrustmaster.com/en/product/t150ffb-en/
During the installation:
- DO NOT CONNECT the racing wheel to the PC before being requested to do so.
- Connect the racing wheel directly to the PC's USB port.
USB hub during this procedure.
- DO NOT CLICK on any windows that may appear during the update.
2)
Restart the computer.
3)
After restarting the computer:
- Remove the USB plug from the computer.
- Simultaneously press buttons L3 and R3 (located on the racing wheel's base), then
connect (without releasing L3 and R3) the USB plug to the PC.
- The following message appears in the lower right-hand corner of your screen (do not do
anything or click on any window during the automatic installation procedure).
- After the installation, a second message appears:
Thrustmaster T150 Bulk Driver
Your racing wheel's bulk drivers are now installed.
must always be set to the PS3 position!
DRIVERS FORCE FEEDBACK
3
(Package) on
We advise against using a