Changing Basic Settings - Siemens SR23EI28ME User Manual

en Basic settings
Basic setting
autoOpen Dry
Wi-Fi
Remote start
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Press ⁠ .
1.
To open the basic settings, press
2.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
3.
the display shows the required set-
ting.
34
Display text Selection
1
o02 o00 - o02
1
Cn0 Cn0 - Cn1
1
rc1 rc0 - rc2
rE Start with
⁠ .
repeatedly until
Description
Activate or deactivate automatic
opening of the appliance door during
the drying phase.
The following settings are possible:
¡ With the "o00" setting, automatic
door opening is deactivated in all
programmes.
¡ With the setting "o01" automatic
door opening is activated in all
programmes.
¡ With the "o02" setting, automatic
door opening is only activated in
the Eco 50° programme.
→ "autoOpen Dry", Page 11
Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
Activate or deactivate remote start.
The following settings are possible:
¡ With the "rc0" setting, remote
start is permanently deactivated.
¡ With the "rc1" setting, remote
start can be selected via the re-
mote start button.
→ "Remote start ", Page 36
¡ With the "rc2" setting, remote
start is permanently activated.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
Press repeatedly until the dis-
4.
play shows the right value.
You can change several settings.
To save the settings, press
5.
for 3 seconds.