Set System Time - TP-Link Archer VR400 User Manual

Chapter 16

16. 1. Set System Time

System time is the time displayed while the modem router is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1. Visit http://tplinkmodem.net, and log in with your TP-Link and the password you set
for the router.
2. Go to Advanced
3. Configure the system time using the following methods:
Manually: Select your time zone and enter your local time.
Get from PC: Click this button if you want to use the current managing PC's time.
Get GMT: Click this button if you want to get time from the internet. Make sure your
modem router can access the internet before you select this way to get system
time.
4. Click Save.
5. After setting the system time, you can set
needs. Tick the check box to enable
time and then click
> System Tools > Time Settings
Save to make the settings effective.
Administrate Your Network
page.
Daylight Saving Time
Daylight Saving Time, set the start and end
according to your
91