Table of Contents
Advertisement
Chapter 11
Note:
Before you enable
VPN
Server, we recommend you configure Dynamic DNS Service (recommended) or assign a static
IP address for router's WAN port and synchronize your
3. In the
Client IP Address
leased to the devices by the PPTP VPN server.
4. Select
Allow Samba (Network Place) access
Samba server.
5. Select
Allow NetBIOS passthrough
server using NetBIOS name.
6. Select
Allow Unencrypted connections
your VPN server.
¾ Step 2. Configure PPTP VPN Connection on Your Remote Device
The remote device can use the Windows built-in PPTP software or a third-party PPTP
software to connect to PPTP Server. Here we use the
as an example.
1. Go to
Start
>
Control Panel
2. Select
Set up a new connection or
System Time
filed, enter the range of IP addresses (up to 10) that can be
to allow your VPN client to access your Samba
to allow unencrypted connections to access
>
Network and Internet
network.
with internet.
to allow your VPN client to access your
Windows built-in PPTP software
>
Network and Sharing
Center.
51
Hide quick links:
Advertisement
Table of Contents
