Contents Important Safety Your wireless speaker Introduction What's in the box Overview of the speaker 3 Get started Charge the built-in battery Turn on/off Play from Bluetooth devices Play from Bluetooth devices Control playback Pairing for stereo mode Other features Charge an external audio device Product information Troubleshooting...
1 Important • Disposing a battery into fire or a hot oven, mechanically crushing or cutting a battery can result in an explosion. • Leaving a battery in an extremely high temperature surrounding, or an extremely low air pressure environment may result in an explosion or leakage of flammable liquid Safety or gas. Warning Important safety instructions • Make sure that the power supply voltage • Never remove the casing of this speaker.
2 Yo u r w i re l e s s Overview of the speaker speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www. philips.com/welcome. Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices.
3 Get started Caution Make sure that the • Risk of speaker damage! power supply voltage corresponds to the voltage on the back or the underside of the Always follow the instructions in this chapter in unit. sequence. • Risk of electric shock! When unplug the USB cable, always pull the plug from the socket. Never pull the cable. Charge the built-in battery • Use only a USB cable specified by the manufacturer or sold with this speaker. T h e s p e a k e r i s p o w e r e d b y a b u i l t - i n rechargeable battery.
You can also press and hold for 2 seconds to enter Bluetooth pairing mode. Note Enable Bluetooth and select “Philips JS50” • Any speaker can be used as the primary speaker. in the Bluetooth list on your device for • The speaker connected to a Bluetooth device pairing. can only be used as the primary speaker.
5 Other features Press to power on both speakers. They will enter Bluetooth pairing mode automatically. The speaker connected to your Bluetooth device will be used as the primary speaker. On the primary speaker, press and hold Charge an external audio to enter stereo pairing mode until the LED indicator blinks red and blue alternately device quicky.
If the problem remains Power supply 5V 3A unsolved, go to the Philips website (www.philips. Built-in Lithium battery 7.4V, 4400mAh com/welcome). When you contac t Philips, USB port 5V 2A ensure that the speaker is nearby and the model number and serial number are available. Dimensions (W x H x D) 299 x 98 x 100 mm Weight (main unit) 1.065 kg...
Hong Kong Holding Limited may void the user’ s • The Bluetooth reception is poor. Move the authority to operate the product. device closer to this speaker or remove any obstacle between them. Fail to f ind [Philips JS50] on your Compliance Bluetooth device for pairing • Press and hold for 2 seconds to enter Bluetooth pairing mode, and then try again.
products and batteries. Follow local rules and FCC Statement never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative This device complies with Part 15 of the FCC consequences for the environment and human Rules. Operation is subject to the following health.
Trademark notice ® The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.
Page 12
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.