Troubleshooting - ION Street Rocker Mini Quick Start Manual

Troubleshooting

If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce
the overall volume of Street Rocker Mini using the Volume knob.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the
bass level. This will allow you to play the music louder before clipping (distortion) occurs.
If there is poor AM reception: When you have a Bluetooth device that is connected, disconnect
your Bluetooth device in order to listen to AM radio. To adjust AM reception, move the entire unit.
If you cannot connect your audio device to Street Rocker Mini via Bluetooth:
•
Have your audio device (e.g., smartphone or tablet) and Street Rocker Mini as close together as
possible while trying to connect. Make sure both the audio device and Street Rocker Mini are
unobstructed by walls, furniture, etc.
•
Reset the Bluetooth connection on Street Rocker Mini to disconnect Street Rocker Mini from
any other audio device and restart the search process. If this does not work right away, power
off Street Rocker Mini and then power it back on. See
information.
•
Reset the Bluetooth connection on your audio device by turning Bluetooth off and back on. You
can find this under the Bluetooth menu in the Settings for your phone or other audio device.
If this does not work, and you have connected to Street Rocker Mini before, find Street Rocker
Mini in the list of available or previously connected devices in your audio device's Bluetooth
menu, tap the "gear" or "i" icon located next to it and then select Unpair or Forget. Turn Street
Rocker Mini off and back on and try pairing again once it reappears in your available devices
list.
Note: If Street Rocker Mini has been paired to another audio device recently that is still within
range, you may need to repeat this process with that audio device to fully disconnect.
10
Pairing a Bluetooth Device for more