Royal Sovereign RBC-ES200 Owner's Manual page 10

ERROR CODE DISPLAY AND SOLUTIONS
Error Code
F
E01/E02
E03
E04
E05
H
If you are receiving error codes above, check the machine for dust. If you continue to receive error codes,
please contact Royal Sovereign's Service Center at 1-800-397-1025.
9
Reason
Suspect note is flagged due to half size
error (partly ripped or folded)
The left (right) counting sensor is dirty or
broken
Code disc sensor is dirty or broken
Hopper sensor is dirty or broken
Stacker sensor is dirty or broken
Hole in bill. Sometimes found in very old or
dirty bills.
(CONTINUED)
Solutions
Remove first bill from the stacker,
then continue counting.
Clean the sensor or contact Royal
Sovereign to replace sensor if error
code persists.
Clean the sensor or contact Royal
Sovereign to replace sensor if error
code persists.
Clean the sensor or contact Royal
Sovereign to replace sensor if error
code persists.
Clean the sensor or contact Royal
Sovereign to replace sensor if error
code persists.
Remove first bill from the stacker,
then continue counting.