Advertisement
Quick Links
System Firmware Update Instructions
Do not playback the system update file on any speaker or headphone system as this could lead to
damage to equipment and/or hearing loss. Korg or any of its affiliates will not accept responsibility for
any damages, personal loss or injury that may result from playback of the file.
What you will need
You will need the following to perform your update.
An audio player or personal computer capable of audio playback
A stereo mini-jack audio cable
AC adapter KA-350 or six AA batteries
Make sure the batteries are brand new if using alkaline or fully charged if using NiMH batteries.
volca bass will not enter update mode if the batteries are depleted.
Preparations
1.
Unzip the file "volcabass_updater_0102.zip".
If using an audio player, transfer the file volcabass_sys_0102.wav from your computer to your audio
player.
Do not playback the system update file on any speaker or headphone system as this could lead
to damage to equipment and/or hearing loss.
2.
Check the current version
Turn the power on while pressing the REC button.
volca bass System Firmware Update Instructions
1
Advertisement
Related Manuals for Korg Volca Bass
Summary of Contents for Korg Volca Bass
- Page 1 Do not playback the system update file on any speaker or headphone system as this could lead to damage to equipment and/or hearing loss. Korg or any of its affiliates will not accept responsibility for any damages, personal loss or injury that may result from playback of the file.
- Page 2 If the current system is version 1.02, the display will be lit as shown. Your volca bass is already up ver. 1.02 to date. Connect the audio output of your playback device to the SYNC IN connector on your volca bass. volca bass System Firmware Update Instructions...
- Page 3 Make sure all other applications are shut down and do not operate you computer during the update. The update will take approximately three minutes. Do not turn your volca bass off or stop playback while update is in progress.
- Page 4 When the update has been successfully completed, “End” will be displayed. Now, turn the power off. Go back to step 2 of “Preparations” and check that your volca bass has been updated. Tips Update may fail with some audio players, computers or software. If this is the case, please try with a different device.