Specifications - North Star 999883 Owner's Manual

Electrical System Requirements
Electrical connection
Amp draw from pump
Sprayer Specifications
Maximum GPM
Maximum Pressure
Tank Maximum Capacity
Overall Dimensions
Dry Weight / Weight full of water
Tongue Weight (full of water)
Broadcast Nozzle Specifications
Total Spray Width
Effective Spray Width
Spray Overlap
Component Materials*
Tank..........................
Suction Tube.............
Hose...........................
Pump..........................
Valves.......................
Gun and Nozzle........
*Before using any chemical, check to ensure the chemical is compatible with all materials in the
system.
The noise emissions from this product do not exceed 70 dB(A).
Note: Pumping any petroleum-based fluid (gasoline, diesel, kerosene, oil) will severely damage the
pump.
The manufacturer reserves the right to make improvements in design and/or changes in specifications at
any time without incurring any obligation to install them on units previously sold.
Any Questions, Comments, Problems or Parts Orders
Call NorthStar Product Support 1-800-270-0810

Specifications

12 VDC
8 Amps
2.2 GPM (8.3 Liters/min.)
70 PSI (4.8 Bar)
31 Gallons (113.6 Liters)
46.7" x 41.25" x 27.75"
(119cm x 105cm x 29cm)
60 lb. / 308 lb. (27.2 kg. /139.7kg)
57.0 lb. (25.8 kg)
120 in. (305 cm)
80in. (203cm)
40 in. (102 cm)
Polyethylene, EPDM
Polypropylene, PVC, Stainless Steel
PVC, EPDM (Max. Pressure 6.9bar/100psi)

Polypropylene, Viton , Santoprene, Stainless Steel
Polypropylene, Polyacetal, Viton®, Nylon
Nylon, Polyacetal, Aluminum
52