[Self Test] Display - Panasonic PT-LW376 Operating Instructions Manual

[SELF TEST] display

[SELF TEST] can be checked in the WEB control screen [Status] → [Projector status].
The following list shows the alphanumeric symbol that is displayed when an error or a warning has occurred and
its details. Confirm "Action number", and follow the measure in "Measure for error and warning" (x page 122).
Error/warning display
U11
U12
U13
U21
U22
U23
U41
U61
U51
H11
H12
H13
FE1
FE2
FE3
F12
F61
Note
f The self-diagnosis display and the details of the malfunction may be different.
f For errors and warnings that are not described in the table, consult your dealer.
r Measure for error and warning
Action
number
1 The operating environment temperature is too high. Use the projector in an appropriate operating environment temperature
2 The lamp unit runtime has come close to or exceeded 20,000 hours, please replace the lamp unit.
3 If the lamp does not light up after turning the power off and on, consult your dealer.
If the error/warning display does not go off even after unplugging the power plug from the outlet and turning on the power
4
again, consult your dealer.
*1 For the operating environment temperature of the projector, refer to "Operating environment temperature" (x page 135).
122 - ENGLISH
Chapter 6 Maintenance - [SELF TEST] display
Intake air temp. warning
Optics module temp. warning
Exhaust air temp. warning
Intake air temp. error
Optics module temp. error
Exhaust air temp. error
Lamp remain time warning
Lamp remain time error
Lamp error
Intake air temp. sensor error
Optics module temp. sensor error
Exhaust air temp. sensor error
Intake fan error
Exhaust fan error
Lamp fan error
Iris error
Ballast com. error
Details
Measure
Action number
1
1
1
1
1
1
2
2
3
4
4
4
4
4
4
4
4
.
*1