Gigabyte Z490 AORUS PRO AX User Manual page 17

7) EC_TEMP1/EC_TEMP2 (Temperature Sensor Headers)
Connect the thermistor cables to the headers for temperature detection.
1
1
EC_TEMP2 EC_TEMP1
DEBUG
PORT
8) LED_C1/LED_C2 (RGB LED Strip Headers)
The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power
DEBUG
rating of 2A (12V) and maximum length of 2m.
PORT
1
LED_C1
1
LED_C2
1
12V
9) D_LED1/D_LED2 (Addressable LED Strip Headers)
The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating
of 5A (5V) and maximum number of 1000 LEDs.
1
D_LED1 D_LED2
Addressable LED
Strip
1
For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of
GIGABYTE's website.
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
Pin No. Definition
1 SENSOR IN
2 GND
Pin No. Definition
1 12V
2 G
3 R
4 B
Connect one end of the RGB LED strip extension cable to the
header and the other end to your RGB LED strip. The black wire
(marked with a triangle on the plug) of the extension cable must be
connected to Pin 1 (12V) of this header. The 12V pin (marked with
RGB LED
an arrow) on the other end of the extension cable must be lined
Strip
up with the 12V of the LED strip. Be careful with the connection
orientation of the LED strip; incorrect connection may lead to the
damage of the LED strip.
Pin No. Definition
1 V (5V)
1
2 D
3 No Pin
4 G
Connect your addressable LED strip to the header. The power
pin (marked with a triangle on the plug) of the LED strip must be
connected to Pin 1 of the addressable LED strip header. Incorrect
connection may lead to the damage of the LED strip.
- 17 -