Operation; Start-Up And Initial Setting; Welcome; Ethernet - ViewSonic CDE4320 User Manual

4.

Operation

NOTE: The control button described in this section is
mainly on the remote control unless specified
otherwise.
4.1.

Start-up and initial Setting

4.1.1. Welcome

Select your language and tap "Next".

4.1.2. Ethernet

Tape "Next" button to next page and it will show.
1. Connection Type : DHCP / Static IP
2. IP Address
3. Netmask
4. DNS Address
5. Gateway
You also can tape "Back" to previous page.
4.1.3. Date & Time
Enable "Network-provided time" to sync time
with network and select time zone.
4.2.

Watch the Connected Video Source

1. Press INPUT button.
2. Press or button to select a device, then
press OK button.
11