Table of Contents
Advertisement
3. USB Cable
4. Quick Start Guide
5. Warranty Card
6. Ejection Pin
3.1 Installing the SIM Card & Memory Card
You must insert the SIM/SD card before using the phone.
1. Switch off the mobile phone.
2. Remove SIM/SD card tray as instructed in figure below.
3. Insert the SIM/SD card in relevant slot as shown in figure below.
The SD card is a miniature object. Keep it out of the reach of children for
Note:
avoid children swallow it.
3.2 Charging the Battery
Your phone is powered by a rechargeable battery. If your phone comes up a
message which notifies you that the battery power is too low, at that moment,
please recharge the battery. Connect the charger to a power outlet and the micro
USB connector to the phone's USB port. Once the phone has finished charging,
you should unplug the charger.
3.3 Linking to the Networks and devices
Your phone can connect to a variety of networks and devices, including mobile
networks for voice and data transmission, Wi-Fi data networks, and Bluetooth
devices, such as headsets. You can also connect your phone to a computer, to
3. Getting started
8
Advertisement
Table of Contents
