DataCard SP55 Plus Printer Manual page 21

10
Slide the used cleaning sleeve off the spindle.
11
Discard the used cleaning card and used sleeve.
12
Place a new cleaning sleeve on the spindle (1).
13
Remove the protective cover from the sleeve (2).
14
Insert the replaceable cleaning roller (with a new cleaning
sleeve) into the printer (3).
15
Replace the ribbon cartridge, close the printer cover, load
cards, and resume printing.
Cleaning tips
Use the cleaning card as soon as you open the package. The
cleaning solution on the card evaporates after a few minutes.
Some card features, such as signature panels and magnetic
stripes, can require more frequent cleaning of the printer.
Clean printer rollers regularly, such as every time you change
the ribbon.
If you use StickICards™, use a cleaning card after every 100
cards. The printer might also need additional cleaning.
See SP Series Info Central for more cleaning information.
1
2
3
Page 18