Advertisement
Quick Links
Product Outline
10GBASE-SR SFP+ Module and 10GBASE-LR SFP+ Module are SFP (Small Form-Factor
Pluggable) modules to be connected to a Panasonic Switching Hub's SFP+ extension slot.
Specifications
Product name
10GBASE-SR SFP+ Module
Module No.
PN59021
IEEE802.3ae
Standards
10GBASE-SR
SFF-8472 (Diagnostic Monitoring Interface)
Compatible cable
MMF cable
Fiber optic port
connector type
Optical wavelength
850 nm
Operating voltage
Power consumption
1.0 W max
Operating ambient
0 to 50°C /20 to 80% RH (No dew condensation)
temperature/humidity
9 mm (Height) x 14 mm (Width) x 57 mm (Depth)
External dimensions
Mass (Weight)
Installation Guide (this document)
Accessories
Protection cap of the fiber optic port (Attached to the module) x 1
MMF: Multi Mode Fiber
Installation
1. Securely connect the SFP+ Module to the
SFP+ extension slot of a Panasonic Switching
Hub.
2. Remove the protective cap of the SFP+
Module's fiber optic port.
3. Connect a fiber optic cable that meets the
standards specified for the SFP+ Module.
4. Connect another SFP+ Module of the same
model number on the opposite end.
Removal
1. Unlatch the fiber optic cable and remove it from the
SFP+ Module.
2. Pull down the lever of the SFP+ Module 90 degrees as
shown in the figure to unlatch the SFP+ Module.
3. Pull out the SFP+ Module.
10GBASE-LR SFP+ Module
PN59023
IEEE802.3ae
10GBASE-LR
SMF cable
LC connector (Duplex)
1310 nm
DC 3.3 V
1.25 W max
(Excluding protruding sections)
17 g
x 1
SMF: Single Mode Fiber
SFP+ extension slot
Switching Hub
Fiber optic port
SFP+ Module
Lever
10GBASE-SR SFP+ Module (SFP+10GSR)
Installation Guide
10GBASE-LR SFP+ Module (SFP+10GLR)
Thank you for purchasing our product.
This document provides important information about safe and proper
operations of this SFP+ Module.
Please read the "Important Safety Instructions".
Any problems or damage resulting from disassembly of this SFP+
Module by customers are not covered by the warranty.
2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021
©
PN59021/PN59023
Model No.
2019
C1214-10719
Printed in Japan
Advertisement
Related Manuals for Panasonic PN59021
Summary of Contents for Panasonic PN59021
- Page 1 Product Outline 10GBASE-SR SFP+ Module and 10GBASE-LR SFP+ Module are SFP (Small Form-Factor 10GBASE-SR SFP+ Module (SFP+10GSR) Installation Guide Pluggable) modules to be connected to a Panasonic Switching Hub’s SFP+ extension slot. 10GBASE-LR SFP+ Module (SFP+10GLR) Specifications PN59021/PN59023 Model No.
- Page 2 The following symbols are used to classify and describe the type of instructions to be observed. 1. Panasonic will not be liable for any damage resulting from the operation not in accordance with this document or the loss of communications, which may or may not be caused by failure and/or malfunction of this product.