Advertisement
3. Remove the bowl and place the installation template on
the floor. Drill the anchor bolt hole (depth
floor with an 15mm dia. drill, then remove the template.
It is suggested to reverse the bowl before drilling with the
template. Compare the actual loacation of installation hole
with the template to map more accurate installation
location, as shown in the following figure.
4. Adjust the distance between centerline of PVC waste pipe
and the floor (wall) to match it consistent with marked
roughing-in.
185
Installation of S trap: Fix S trap onto wall with expansion
screw and insert into the reserved drainage pipe(Fig.7).
Push the bowl to insert the drainage hole into the S trap
and also insert the water pipe into the outlet of the in-wall
tank.
1269084-T01-B
3.
38mm) in the
Fig.#5
5
4.
Fig.#6
6
185
50
50mm From Floor
110~130
With 12504 S-trap(For Separate Purchase)
12504
(
Fig.#7
-4-
15
185
50mm
)
7
38
PVC
UNIT mm
7
Advertisement
