Important Safety Instructions, please read carefully! • This unit is meant to playback CDs, to receive radio program and to playback suitable audio files from SD / MMC flash memory cards. Using it in any another way you risk electric shock. This device may used differently instructions in this manual.
Page 4
The control elements . . . on the remote control:...
Setting up the system You can mount your new CD micro system on a plane and stable surface. The stand of the unit should be located close to a properly connected power socket. In order to ensure a sufficient ventilation, the device must not be operated on soft surfaces (carpets or the like).
Page 8
Operation of the CD micro system General operation Setting the time You can set the time in standby mode. 1. To do this, press CLOCK/MEMORY for 3 seconds. “ that the time is displayed in 24-hour mode. 2. If you want the time to be displayed in 12-hour mode, press either the confirm, press CLOCK/MEMORY.
Page 9
CD / MP3 operation This device plays generally audio CDs as well as CD-R(W) media burnt with a PC. For MPEG format bit rates from 8 to 320 kbps are supported. Due to the various types of blank CDs, PC types, operating systems, burning software and methods, we cannot guarantee that every burnt CD will be played immaculately.
Page 10
To play MP3 CDs, you can search for tracks through the first letter of the name of the track. To do this, press STEREO / MONO / ESP. Then, enter the first letter of the title you are searching for using SKIP-DN ( ) / SKIP-UP ( ). The name of the track immediately appears in the display.
Playback of USB / SD/MMC Flash Memory The system is equipped with a card slot for SD and MMC flash memory cards as well as a USB port. You can use these interfaces to play MP3 files. If you are using both interfaces, the card reader will be selected first by the system.
Page 12
Save station We have equipped the system with 40 memory spaces (30 x USW, 10 x MW) into which you can save your favourite stations. To do this: Ø Enter the first station that you would like to save. Ø Press CLOCK / MEMORY to start saving.
Page 13
Ø The entered times will remain saved and if you press the TIMER button again at a later date, the timer programming will be reactivated. So: Briefly press TIMER button = Turn timer on / off. Press TIMER for a long time = Change timer settings. Sleep Timer You can have the system turn off automatically at a predetermined time.
Disposal advice When the operating life of this device has ended it must not be disposed as domestic waste, but in accordance with national environmental guidelines. Support In case of any problems or malfunctions occur while running your device, you have several options to get help from our support-centre: •...
Page 16
We reserve the right to correct errors and make technical alterations. This manu- al is copyrighted. All rights reserved. Neither the manual as a whole nor excerpts may be reproduced without our prior written permission. DK digital GmbH 40878 Ratingen Germany...