Usb Configuration - Asus C785S-IM-AA User Manual

Resolution
This allows you to set the number of rows and columns supported on
the Legacy OS.
Configuration options: [80x24] [80x25]
Redirection After POST
This setting allows you to specify if Bootloader is selected than Legacy
console redirection.
[Always Enable]
[Bootloader]

4.4.14 USB Configuration

NOTE: The USB Devices item shows the auto-detected values. If no
USB device is detected, the item shows None.
Legacy USB Support
[Disabled] The USB devices can be used only for the BIOS setup program.
It cannot be recognized in boot devices list.
[Enabled] Enables the support for USB devices on legacy operating
systems (OS).
[Auto] Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled.
If no USB device is detected, the legacy USB support is disabled.
78 Single Board Computer
Legacy Console Redirection is enabled for
Legacy OS.
Legacy Console Redirection is disabled before
booting to Legacy OS.