Miele KM 3034 Operating And Installation Instructions page 38

Problem solving guide
Problem
The in-operation/
residual heat indicators
are flashing and a
combination of letters
and numbers appears in
the minute minder
display.
38
Possible cause and remedy

The overheating protection mechanism has been
activated.
 Turn all the control knobs clockwise to "". You can
operate the cooking zones again once  has
disappeared.

There is a fault with the electronics.
 Reset: Touch the easy switch-off function sensor
for three seconds.
 If this fault message continues to appear in the
display, contact Miele.
All other faults
There is a fault with the electronics.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.