Directed Electronics Matrix 3 Owner's Manual page 30

Dei clifford matrix 3 car alarms: owners guide

Hide thumbs Also See for Matrix 3:

Table of Contents

: This is a sensor mounted in the vehicle that is

Shock Sensor

designed to pick up impacts to the vehicle or glass.

: Noise generating device usually installed in the engine

Siren

compartment of the vehicle. It is responsible for generating the

"chirps" you hear, as well as the six tones you hear while the

alarm is triggered.

: Hand-held, remote control which operates the

Transmitter

various functions of your system.

: This is what happens when the

Trigger or Triggered Sequence

alarm "goes off" or "trips". The triggered response of your system

consists of 30 seconds of siren sounding and parking light flashing.

: A small push-button switch mounted somewhere

Valet Switch

inside the vehicle. It is used to override the alarm when a trans-

mitter is lost or damaged, or to enter or exit Valet mode.

Lighter impacts to the vehicle will

Warning Zone Response:

generate the secondary Warning Zone response. It consists of

several seconds of siren chirps and parking light flashes.

: A zone is a separate input that the alarm can recognize as

Zone

unique. Each input to the system is connected to a particular

zone. Two or more inputs often share the same zone.

Table of Contents