Clifford IntelliGuard 8000 Complete Owner's Manual page 12

Dei clifford intelliguard 8000 car alarms: owners manual

Hide thumbs Also See for IntelliGuard 8000:

Installation manual (19 pages)

Table Of Contents

Table of Contents

1 ✱ press

2 ✱ presses

Play Personalized Siren Sounds**:

3 ✱ presses

4 ✱ presses

5 ✱ presses

6 ✱ presses

Reset all features (except remotes

7 ✱ presses

and valet code) to factory settings

NOTE 1: Press button 1 of the new MASTER 5-button remote control. You will hear one chirp. Immediately press button

1 again. You will hear two chirps to confirm that the new remote control has been added.

NOTE 2: Selection of this feature will cause the system to sound a few seconds of siren sound #1. Press the blank

button to turn on this sound or the ✱ button to turn it off. The system will then sound a few seconds of sound #2.

Repeat: blank=ON, ✱=OFF for each of the six sounds.

NOTE 3: You'll hear two chirps to indicate all remotes have been cleared from memory. You must now add

new/existing remotes with the "Add master remote control" feature and/or the "Other vehicle's remote" feature.

NOTE 4: Immediately PRESS THE BLANK BUTTON, THEN enter your new code, wait for the two chirps, then turn off the

ignition (you'll hear 3 chirps to confirm program mode exit). You MUST now turn the ignition back on and then

re-enter your new PIN code. If the LED flashes on, your new code has been accepted. If the LED does not light, the two

codes did not match and the system has reverted to your previous code.

NOTE 5: Lets you arm/disarm with a new companion remote control or ANY remote (including 5-button master type)

of a Clifford G4 system on your other vehicle(s). For instance, to set button ✱ of the other car 's companion remote to

arm and disarm your IntelliGuard 8000, select column 4, row 1, then press button ✱ of the other vehicle's remote

(you'll hear one chirp). Immediately press button ✱ a second time (you will hear a 2-chirp confirmation). Button ✱ of

the other vehicle's remote will now arm/disarm your IntelliGuard 8000 on this vehicle.

NOTE 6: The features in this column allow you to control your system with the remote control of a G4 system on your

other vehicle(s). Just select the function you wish, then press the unused button or button combination on the other

remote that you want to use to perform that function on this system (you will then hear the chirps noted). NOTE: You

must first set a button or button combination on the other car's remote that will arm/disarm the system (column 4, row

1) before these others will be accepted.

Clifford vehicle security systems and accessories require professional installation by an Authorized Clifford Dealer. Unless the system is sold and installed by an

Authorized Clifford Dealer, all product warranties and guarantees are void. (UK: This does not affect your statutory rights.) As the manufacturer, Clifford

Electronics warrants to the original consumer purchaser, the system control unit and remote controls to be free from defects in material and workmanship for as

long as you own the vehicle in which the system was originally installed. All other parts of the system and accessories to the system are warranted to be free from

defects in material and workmanship for one (1) year from the date of purchase. Clifford Electronics will repair or replace, at its option and free of charge during

the warranty period, any system component that proves defective in material or workmanship under normal installation, use, and service, provided the product

is returned to our factory by an Authorized Clifford Dealer, transportation charges prepaid. Products returned to our factory must be accompanied by a

photocopy of the purchase receipt. In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. Any damage

to the product(s) as a result of misuse, abuse, neglect, accident, incorrect wiring, improper installation, destruction or alteration of the serial number, repair or

alteration outside our factory, or any use violative of instructions furnished by us will void the warranty. This warranty is limited to defective parts and

specifically excludes any incidental or consequential damages connected therewith. This warranty is not transferable. Clifford Electronics makes no warranty

against theft. This warranty is not to be construed as an insurance policy against loss. Warranty on installation labor, removal and reinstallation charges are not

the responsibility of Clifford Electronics, Inc.

Table of User-Selectable Features

1 blank press

Add master remote control

NOTE 1

Personalized Siren Sounds**

NOTE 2

trigger only/always (1/2 chirps)

Siren duration: 30/60/90sec.**

AutoStart*: both off/both on/temp

(1/2/3 chirps)

AutoLock: off/on

AutoUnLock: off/on

Set a new valet/disarming PIN code

Lifetime limited factory warranty terms & conditions

2 blank presses

Chirps: off/loud/quiet

(1/2/3 chirps)

NOT USED

Valet mode entry/exit via the

remote control: off/on

only/battery only (1/2/3/4 chirps)

BlackJax anti-carjacking: off/on

Clear all remotes

NOTE 3

NOTE 4

3 blank presses

AutoArming: off/on

Lock upon AutoArming: off/on

AutoArming entry delay: off/on

FACT: off/on

NOT USED

4 blank presses

NOTE 5 — Add companion remote:

arm/disarm (1 then 2 chirps)