Technical Information; R&Tte; Declaration Of Conformance; Connecting To A Switchboard - BT Freestyle 750 User Manual

64 General information

Technical information

How many telephones can I have?
All items of telephone equipment have a Ringer
Equivalence Number (REN), which is used to calculate
the number of items which may be connected to any
one telephone line. Your BT Freestyle 750 has a REN
of 1. A total REN of 4 is allowed. If the total REN of 4
is exceeded, the telephones may not ring. With
different telephone types there is no guarantee of
ringing, even when the REN is less than 4.
Any additional handsets and chargers that you
register have a REN of 0.
R&TTE
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.

Declaration of Conformance

Hereby, VTech declares that this BT Freestyle 750 is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
If you would like a copy of the Declaration of Conformance,
please email bt.helpdesk@vtecheurope.com
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com

Connecting to a switchboard

This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards, which support tone and
pulse dialling and timed break recall. If in doubt
please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access
code you may have to wait for a moment while the
switchboard picks up an outside line so you will need
to enter a pause in the dialing sequence.
Press and hold to insert a pause (P) before
entering the telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.

Recall

You may need to use the recall function if you are
connected to a switchboard/PBX (Private Branch
Exchange), contact your PBX supplier for further
information. The recall function is set to timed break
recall and is also used for BT Calling Feature.