Table of Contents
Advertisement
No display appears
•
The handset may be switched off.
•
Press and release the
•
The batteries may be flat, dead or incorrectly inserted. Recharge, replace or renew the
batteries.
No dial tone
•
Make sure your handset is registered to the base and within range of the base.
•
Is the telephone cord of the base plugged into the phone socket?
•
Check that the base station is connected to the mains power and switched on.
You cannot link up with the base station
•
Does the display show Out of Range? If so, you are out of range of the base the handset
is registered to or power is off at the base.
•
Batteries could be low or flat.
•
If using more than one base station, check that you have the correct base selected.
Handset does not ring
•
The ringer volume may be switched off (if it is there will be a
Press and hold
see page 55.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
button to switch the handset on.
to switch it off and on. To adjust the ringer volume on the handset,
icon on the display).
Help
69
Advertisement
Table of Contents
