D-Link AirPlus DWL-G710 User Manual page 12

Getting Started (continued)
An example of a wireless Infrastructure network
5 5 5 5 5
Please remember that D-Link AirPlus G wireless devices are pre-configured to
connect together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a cable or DSL-subscriber line into
your home or office).
Consult with your cable or DSL provider for proper installation of the modem.
Connect the cable or DSL modem to the DI-524 router. (See the printed Quick
Installation Guide included with your router.)
Configure the DWL-G710 to communicate with the DI-524 router. (See the printed
Quick Installation Guide included with the DWL-G710.)
If you are connecting a desktop computer to your network, install the D-Link AirPlus
TM
G DWL-G510 wireless PCI adapter into an available PCI slot on your desktop
computer.*
(See the printed Quick Installation Guide included with the network adapter.)
Install the D-Link DWL-G630 wireless cardbus adapter into a laptop computer.
(See the printed Quick Installation Guide included with the DWL-G630.)*
2 2 2 2 2
3 3 3 3 3
*Both DWL-G630 and DWL-G510 should be configured to
communicate with the DWL-G710, not the router.
1 1 1 1 1
6 6 6 6 6
TM
12
4 4 4 4 4