Using the Configuration Menu (continued)
Wireless >Access Point>WPA
When you select WPA in the Wireless configuration window, you will configure the
following:
RADIUS Server 1 IP-
Port-
Enter the port dedicated to the RADIUS server.
Shared Secret-
Enter the secret word that devices on the network will input into their
wPA configuration.
RADIUS Server 2 IP (Optional)-
need to fill out these fields, as above.
TX Rates-
Select the transmission rate from the pulldown menu.
Super G-
Please refer to page 19 for information about this field.
Enter the IP address of the RADIUS server in your network.
If there are two RADIUS servers in your network you will
20