Wep - D-Link DWL-G680 Manual

High-powered wireless 108g notebook adapter

Hide thumbs Also See for DWL-G680:

Table of Contents

DWL-G680 User's Manual

Security - WEP

WEP (Wired Equivalent Privacy) is based on the IEEE 802.11 standard and uses the

RC4 encryption algorithm. Enabling WEP allows you to increase security by encrypting

data being transferred over your wireless network.

To enable WEP, click the radio button next to Wired Equivalent Privacy (WEP) and

click the Configure button.

Key Entry:

Encryption

WEP Key Size:

Note: Your network will slow down and wireless signal may degrade when enabling

WEP encryption due to the added overhead.

D-Link Systems, Inc.

Select the WEP key format (Hexadecimal or ASCII)

Hexadecimal - only A-F and 0-9 are valid characters.

ASCII - All numbers and letters are valid characters.

Enter a WEP key and then select the encryption level. You can make

up to 4 different keys.

Keys:

Select the level of WEP encryption - 64, 128, or 152-bit.

Using the Configuration Utility

Table of Contents