Download Print this page

Ryobi MS-130 Owner's Operating Manual

Download this manual

MS-130

Page 1 MS-130...
Page 3 THANK YOU FOR BUYING A RYOBI PRODUCT. THANK YOU FOR BUYING A RYOBI PRODUCT. f) Dress properly. Do not wear loose clothing or jewellery. f) Dress properly. Do not wear loose clothing or jewellery. THANK YOU FOR BUYING A RYOBI PRODUCT.
Page 4: Specifications
INSTRUCTIONS FOR SAFE HANDLING SPECIFICATIONS 1. Make sure that the tool is only connected to the Voltage............... 230V,50Hz voltage marked on the name plate. Input power..............130W 2. Never use the tool if its cover or any bolts are missing. No load speed.............12000min If the cover or bolts have been removed, replace Sanding paper size........140X140X100mm them prior to use.
Page 5: Dust Extraction
2. Grip the main handle in one hand and push down on the front of the handle with the other hand. 3. Take care to hold the sander parallel to the work, and use only moderate pressure. 4. If there are still marks on your workpiece after sanding, try either going back to a coarser grade paper and sanding the marks out before resuming with the original choice of grade, or try using a new piece of sandpaper to...
Page 6 NOTE...
Page 7 NOTE...