D-Link AirXpert DWL-7000AP Manual page 17

Using the Configuration Menu (continued)
Advanced > Encryption
Authentication:

Open System:
on the network. Open System is the default setting.

Shared Key:
network, the device must be listed in the Access Control List

Shared Key/Open System:

802.1x:
WEP: Select Enabled or Disabled (the default setting is Disabled)
WEP Key Type:
Hexadecimal digits consist of the numbers 0-9 and the letters A-F
ASCII (American Standard Code for Information Interchange) is a code for repre-
senting English letters as numbers from 0-127
WEP Key Size:
Valid Key: Select the key that you will use from one of the four keys in the Key Table.
Input up to 4 keys using the format that you have selected in Wep Key
Key Table:
Type.
Select from one of the following:
the DWL-6000AP will be visible to all devices
in order to access the DWL-6000AP on the
click here to select 802.1x authentication
Select HEX (Hexadecimal) or ASCII
Select 64, 128 or 256 bit for 802.11b; 64, 128, 152 bit for 802.11a
click here to select both options
802.1x - is the first line of
defense against network
intrusion. In the authenti-
cation process the Radius
Server verifies the identity
of the client attempting to
connect to the network. Un-
familiar clients will be denied
access. EAP(Extensible
Authentication Protocol)
is available through the
Windows XP Operating
System. You will need to
use the same type of EAP
protocol on all the devices
in your network when using
the 802.1x feature.
17