Proper Sewing; Operation Of The Halt Switch - Mitsubishi PLK-E0504 Technical Manual

6. PROPER SEWING

6-1. Operation of the halt switch

If an incident such as a thread breakage, needle breakage and any other incidents are
happened during the sewing operation, please hit immediately the halt switch. The sewing
machine running is stopped instantly.
Caution
★Before start the sewing operation, please make sure the location of the halt switch and keep
it in mind the function and how to use it.
★Please keep away the hands and the face from the needle during the sewing operation.
(1) Press the HALT switch (NO.1). All operations will stop, and the sewing machine will stop at
the needle UP state without trimming the thread.
(2) Remove the cause of the abnormality.
(3) To continue sewing, turn the HALT switch (NO.1) to the right, and unlock the switch.
Next, when the start switch (NO.3) (gray foot switch) is pressed again, the operation will
resume from the halted position.
(4) To cancel sewing, turn the HALT switch (NO.1) to the right, and unlock the switch.
Then, press the
The work holder (NO.4) will return to the home position from the stopped position and will
stop.
4
3
key on the operation panel (NO.2).
－15－
2