D-Link DWL-122 Quick Installation Manual page 15

J. SSID: The Service Set
Identifier is the name as-
signed to the wireless
network. The factory SSID
setting is set to default. Make
changes here to match the
SSID on existing Wireless
Router or Access Point.
M. Authentication:
the authentication mode for the
wireless network. The default
setting is set to Open Authentica-
tion.
Appendix B (cont.)
K. Wireless Mode:
The factory setting is
set to Infrastructure.
Ad-Hoc mode is used
for peer-to-peer
networking.
J
K
L
M
N
You can specify
N. Key Length: When encryption is enabled,
you will have the option to specify the level and
key format of the encryption used. Select the
appropriate Key Index : 1-4 and enter ACSII or
hexadecimal digits in the appropriate field.
15
L. Data Encryption:
default setting is set to
Disabled. The adapter
supports WEP when
encryption is enabled.
The