Asko DFI664XXLSOF Operating Instructions Manual page 14

Settings
8. Super rinse
9. High temperature
10. Water hardness
11. Interior light at power off
Exit
14
Options
On/Off
On/Off
0/1/2/3/4/5/6/7/8/9
On/Off
Super rinse adds two extra rinses.
Activated in the following programs:
Normal wash
ECO wash
Sanitation wash
Plastic wash
Lower half
Upper half
Activate the setting High temperature to improve the dishwashing
results. Energy consumption is slightly increased.
Activated in the following programs:
Normal wash
Adjusting the water softener. Select a setting depending on the
hardness of the water supply. It is important that this setting is
correct!
German water French water
hardness scale hardness scale
0-5°dH 0-9°fH
6-8°dH 10-14°fH
9-11°dH 15-20°fH
12-14°dH 21-25°fH
15-19°dH 26-34°fH
22-24°dH 35-43°fH
25-29°dH 44-52°fH
30-39°dH 53-70°fH
40-49°dH 71-88°fH
50°dH 89°fH
Do not forget to put salt in the salt compartment after you have
set the water softener to 1 - 9.
For a water supply with a hardness under 6°dH (9°fH), select 0.
The water softener is deactivated and no salt is needed.
Select whether the interior light is to be switched on when the
dishwasher is turned off and the door is opened. (If the main power
switch is turned on, the interior light is always switched on when
the door is opened.)
To exit the dishwasher's Settings menu, select Exit and confirm
your selection with the mode selector
Recommended
setting
0
1
2
3
4
5
6
7
8
9
.