Sony VPL-VW695ES Quick Reference Manual page 31

Setting items
Network Management
Power Saving
Lamp Setting
All Reset
Description
On: Set when connected to the network and continuously
communicating with the projector control equipment.
Note
When Network Management is set to "On," the network function is
continuously enabled. Set Network Management to "Off" when the unit
is not continuously connected to the network. If you set to "On," the
power consumption increases.
Sets the power saving mode.
Standby: If no signal is input for 10 minutes, power is turned off
automatically and the projector goes into standby mode.
Off: Disables the power saving function.
When replacing the lamps, set the desired lamp setting
(page 48).
All settings are initialized to their factory preset values.
The "Lamp Timer" in the Information menu is not reset.
31