Using The Monitor Set; Connecting To A Pc; Rgb Connection - LG 22MN42A Owner's Manual

12

USING THE MONITOR SET

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports the Plug & Play*
feature.
* Plug & Play: Plug and play is a computer feature
that allows the new device, normally a peripheral,
without requiring reconfiguration or manual
installation of device drivers.

RGB connection

Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the D-sub 15 pin cable as shown the
following illustrations. To transmit an audio signal,
connect an optional audio cable as shown the
following illustrations.
0.5 A A
USB5 V
(Not Provided)
CAUTION
Connect the signal input cable
y
and tighten it by turning the
screws clockwise.
Do not press the screen with
y
your finger for a long time as this may
result in temporary distortion on the screen.
Avoid displaying a fixed image on the
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
If you do not use an optional external
y
speaker, connect the PC to the Monitor set
with the optional audio cable.
The Audio cable is optional. You can
y
obtain additional accessories from most
electronics stores.
If you turn the Monitor set on when the set
y
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.