Table of Contents
Advertisement
Connecting The DI-624 Wireless
Router To Your Network
A.
First, connect the power adapter to the receptor at the back panel of
the DI-624 and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper
operation.
B.
Insert one end of an Ethernet cable to the
of the
DI-624 and the other end to the Ethernet port located on your
Cable or DSL modem. The WAN LED light will illuminate to indicate
proper connection.
C.
Insert an Ethernet cable to
and an available Ethernet port on the network adapter in the computer
you will use to configure the DI-624. The LED light for LAN Port 1 will
illuminate to indicate proper connection. (Note: The WAN Port and LAN
Ports on the DI-624 are Auto-MDI/MDIX. Meaning you can use a
straight-through or crossover-cable to the WAN Port and LAN Ports.
D.
Computers equipped with 802.11b wireless adapters will be able to
connect to the DI-624. The DWL-G650 AirExtreme Wireless Cardbus
Adapter and the DWL-G520 AirExtreme Wireless PCI Adapter will be
able to connect out of the box with the router using their default
wireless settings.
C.
D.
Antennas
These are the
Used to
connections for
wirelessly
Ethernet cables to
connect to
Ethernet enabled
802.11b
adapters.
Pressing this button restores
the Router to its original factory
LAN port 1 on the back panel of the
LAN PORTS
This is for the connection
the Cable or DSL modem
computers.
Reset Button
default settings.
WAN port on the back panel
B.
WAN PORT
of an Ethernet cable to
A.
Receptor for
Power
Adapter.
DI-624
Advertisement
Table of Contents
