Air Filter And Vent Maintenance; Cleaning The Air Filter And Vents; Replacing The Air Filter - Epson EH-TW750 User Manual

Air Filter and Vent Maintenance

Regular filter maintenance is important to maintaining your projector. Clean
the air filter when a message appears telling you the temperature inside the
projector has reached a high level. It is recommended that you clean these
parts over a 6,000‑hour period. Clean them more often than this if you use the
projector in a particularly dusty environment.
Attention
If regular maintenance is not performed, your Epson projector will notify you
when the temperature inside the projector has reached a high level. Do not wait
until this warning appears to maintain your projector filter as prolonged exposure
to high temperatures may reduce the life of your projector or lamp.
g g Related Links
• "Cleaning the Air Filter and Vents"
• "Replacing the Air Filter" p.141
• "List of Functions" p.11

Cleaning the Air Filter and Vents

Clean the projector's air filter or vents if they get dusty, or if you see a
message telling you to clean them.
a Turn off the projector and unplug the power cord.
p.141
b Gently remove the dust using a small vacuum designed for computers
or a very soft brush (such as a paintbrush).
You can remove the air filter so that you can clean both sides. Do
not rinse the air filter in water, or use any detergent or solvent to
clean it.
a
Attention
Do not use canned air. The gases may leave a flammable residue or push
dust and debris into the projector's optics or other sensitive areas.
c If dust is difficult to remove or the air filter is damaged, replace the air
filter.

Replacing the Air Filter

You need to replace the air filter in the following situations:
• After cleaning the air filter, you see a message telling you to clean or replace
it.
• The air filter is torn or damaged.
You can replace the air filter while the projector is mounted to the ceiling or
placed on a table.
141