Bridge Parameters - D-Link DES-6300 User Manual

Object/OID
rlDot3adAggBalanceEntry
1.3.6.1.4.1.171.65.2.1
rlDot3adAggBalanceForwardType
1.3.6.1.4.1.171.65.2.1.1
rlDot3adAggBalanceLayer
1.3.6.1.4.1.171.65.2.1.2
rlDot3adAggBalanceUsedAddresses
1.3.6.1.4.1.171.65.2.1.3
rlDot3adAggBalanceBroadcastType
1.3.6.1.4.1.171.65.2.1.4
dot3adAggIndex
1.2.840.802.10006.300.43.1.1.1.1.1

Bridge Parameters

Use the following variables to modify the system operating parameters, unicast tables,
multicast tables, and spanning tree tables.
Object/OID
rndBasePhysicalAddress
1.3.6.1.4.1.171.2.12
rndBridgeType
1.3.6.1.4.1.171.2.1
dot1dTpAgingTime
1.3.6.1.2.1.17.4.2
Object/OID
dot1qFdbTable
dot1qFdbId
1.3.6.1.2.1.17.7.1.2.1.1.1
TRUNK Balance Table
Description
Trunk Balance Table Entry.
Balances the trunk in either 1 of 2 modes. The
possible values are: Bridging | Routing
Specifies the Balance Layer that the trunk used
for the specified Forward Type.
Specifies the network layer addresses used for
balancing unicast frames.
Specifies the criterion used for balancing L2
broadcast and unknown frames.
Identifies the trunk number.
Operating Parameters
Description
The device's MAC address.
Types of bridging the device can perform.
The number of seconds the learned entries remain in
the Forwarding Table. The counter is reset each time
the entry is used. After this time, entries are deleted
from the table. There is a minimum 10 second period.
Unicast Global Forwarding Table
Description
The node's ID.
MIB Object Reference
Field Name in NMS
Forward Type (Trunk
Balance Table)
Layer (Trunk Balance
Table)
Used Addresses (Trunk
Balance Table)
Broadcast Type (Trunk
Balance Table)
Index (Trunk Balance
Table)
Field Name in NMS
Bridge Address
Bridge Type
Forwarding Table
Aging Time
Field Name in NMS
VLAN ID
5-11